ADTRAN AOS Version R10.1.0 Command Reference Manual page 2834

Command Reference Guide Radio Interface Command Set
station-role access-point
Use the station-role access-point command to set the radio operation mode to access point (AP). Use the
no form of this command to return to the default value.
Syntax Description
No subcommands.
Default Values
By default, the station role is set to access-point.
Command History
Release 15.1 Command was introduced.
Usage Examples
The following example sets the station role to access-point on an 802.11bg wireless radio:
(config)#interface dot11ap 1/1 radio-type 802.11bg
(config-dot11ap 1/1-bg)#station-role access-point
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 2834