ADTRAN AOS Version R10.1.0 Command Reference Manual page 2849

Command Reference Guide
security wep-key-length
Use the security wep-key-length command to specify the length of the wired equivalency privacy (WEP)
key to be programmed with the security wep-key command. Use the no form of this command to return to
the default setting. Variations of this command include:
security wep-key-length 104
security wep-key-length 128
security wep-key-length 40
The addition of 24-bit initialization vector (IV) makes the 40 bits become 64 bits, 104 bits
become 128, and 128 bits become 152 on the client.
Syntax Description
wep-key-length
Default Values
By default, no keys are defined.
Command History
Release 15.1
Functional Notes
There are four keys to program. At least one WEP key must be defined. The corresponding number of
hexadecimal characters required is determined by:
key size on client, key size on AP = number of keys multiplied by the hexadecimal characters in the key
Examples:
64, 40 = 4 x 10
128, 104 = 4 x 26
152, 128 = 4 x 32
Usage Examples
The following example sets the WEP key length to 104:
(config)#interface dot11ap 1/1.1
(config-dot11ap 1/1.1-bg)#security wep-key-length 104
60000CRG0-35E
Specifies the WEP key length. Valid entries are 40, 104, and 128.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
VAP Interface Command Set
2849