ADTRAN AOS Version R10.1.0 Command Reference Manual page 2700

Command Reference Guide
vlan <vlan id>
Use the vlan command to create a virtual local area network (VLAN) within the VLAN database. Use the
no form of this command to delete a previously created VLAN from the database.
Syntax Description
<vlan id>
Default Values
No default values are necessary for this setting.
Command History
Release 5.1
Usage Examples
The following example creates VLAN 2 only within the VLAN database. This VLAN is not added to the
running configuration until an exit or apply command is issued:
(vlan)#vlan 2
VLAN 2 created.
Name = VLAN0002
(vlan)#
The following example removes VLAN 2 from the VLAN database. This VLAN is not removed from the
running configuration until an exit or apply command is issued:
(config)#vlan database
(vlan)#no vlan 2
60000CRG0-35E
Specifies a valid VLAN interface ID. Range is 1 to 4094.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
VLAN Database Command Set
2700