ADTRAN AOS Version R10.1.0 Command Reference Manual page 3513

Command Reference Guide
rtp dtmf-relay
Use the rtp dtmf-relay command to configure the method by which Realtime Transport Protocol (RTP)
dual tone multi-frequency (DTMF) events are relayed, either inband in the RTP stream or out-of-band
(OOB) using named telephone events (NTEs). RTP DTMF relay is used to prevent the tone (dialed digits)
from being corrupted. Use the no form of this command to return to the default value. Variations of this
command include:
rtp dtmf-relay inband
rtp dtmf-relay nte <value>
Syntax Description
inband
nte <value>
Default Values
By default, the rtp dtmf-relay is set for NTE 101.
Command History
Release 9.3
Release 11.1
Usage Examples
The following example configures RTP DTMF relay events for NTE with an event value of 101:
(config)#voice trunk t01 type isdn
(config-t01)#rtp dtmf-relay nte 101
60000CRG0-35E
Configures RTP DTMF relay events for inband.
Configures RTP DTMF relay events for NTE. Enter a value between
96 and 127.
Command was introduced.
Command was expanded to include the integrated services digital network
(ISDN) trunk.
Copyright © 2012 ADTRAN, Inc.
Voice ISDN Trunk Command Set
3513