ADTRAN AOS Version R10.1.0 Command Reference Manual page 3487

Command Reference Guide
t38 max-buffer <value>
Use the t38 max-buffer command to set the maximum buffer size for T.38 fax operation. Use the no form
of this command to return to the default value.
Syntax Description
<value>
Default Values
By default, the maximum buffer size is set to 200.
Command History
Release 16.1
Usage Examples
The following example sets the t38 max-buffer to 100:
(config)#voice trunk t01 type analog supervision loop-start
(config-t01)#t38 max-buffer 100
60000CRG0-35E
Specifies the value of the max-buffer attribute in the Session Description
Protocol (SDP) offer when the T.38 session is initiated. Range is 0 to
800 bytes.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice Analog Trunk Command Set
3487