ADTRAN AOS Version R10.1.0 Command Reference Manual page 3111

Command Reference Guide
The following are commands used to configure an IP hardware ACL. IP hardware ACL configuration
includes creating a remark for the ACL, specifying an ACL action, a protocol, a packet source, a source
port, a packet destination, and a destination port. These commands are described in this section in
alphabetical order:
deny <protocol> <source> <source port> <destination> <destination port> on page 3112
permit <protocol> <source> <source port> <destination> <destination port> on page 3114
remark <text> on page 3116
The following are commands used to configure a MAC hardware ACL. MAC hardware ACL
configuration includes creating a remark for the ACL, specifying the ACL action, a source MAC address,
and a destination MAC address. These commands are described in this section in alphabetical order:
deny mac <source> <destination> on page 3117
permit mac <source> <destination> on page 3119
remark <text> on page 3116
The following are commands used to configure a hardware access map. Access map configuration includes
specifying which hardware ACL(s) the map will use and the relationship between those ACLs, and
applying the access map to a VLAN or VLANs. These commands are described in this section in
alphabetical order:
forward ip <acl name> on page 3121
forward mac <acl name> on page 3123
vlans <vlan id> on page 3125
60000CRG0-35E
Hardware ACLs and Hardware Access Maps
Copyright © 2012 ADTRAN, Inc. 3111