ADTRAN AOS Version R10.1.0 Command Reference Manual page 2937

Command Reference Guide
permit
Use the permit command to add an entry to the community list that allows only Border Gateway Protocol
(BGP) routes containing the specified community number in the community attribute. Use the no form of
this command to remove the statement from the community list. Variations of this command include:
permit <value>
permit internet
permit local-as
permit no-advertise
permit no-export
Syntax Description
<value>
internet
local-as
no-advertise
no-export
Default Values
No default values are necessary for this command.
Command History
Release 9.3
Usage Examples
The following example permits BGP routes that match the AS path attributes:
(config)#ip as-path-list listname
(config-comm-list)#permit 30:22
60000CRG0-35E
Permits routes that contain this value in their community attribute. This is a
numeric value that can be an integer from 1 to 4294967295 or string in the
form aa:nn, where aa is the autonomous system (AS) number and nn is the
community number. Multiple community number parameters can be present
in the command.
Permits routes that contain the reserved community number for the Internet
community.
Permits routes that contain the reserved community number for
NO_EXPORT_SUBCONFED. Routes containing this attribute should not
be advertised to external BGP peers.
Permits routes that contain the reserved community number for
NO_ADVERTISE. Routes containing this attribute should not be advertised
to any BGP peer.
Permits routes that contain the reserved community number for
NO_EXPORT. Routes containing this attribute should not be advertised to
BGP peers outside a confederation boundary.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Community List Command Set
2937