ADTRAN AOS Version R10.1.0 Command Reference Manual page 3254

Command Reference Guide
t38 max-datagram <value>
Use the t38 max-datagram command to set the maximum datagram value in this unit. Use the no form of
this command to return to the default value.
Syntax Description
<value>
Default Values
By default, the maximum datagram value is set to 72 bytes.
Command History
Release 16.1
Release A5.01
Usage Examples
The following example sets the t38 max-datagram to 100 on the Media Gateway Control Protocol
(MGCP) endpoint:
(config)#voice mgcp-endpoint 1
(config-mgcp-1)#t38 max-datagram 100
60000CRG0-35E
Specifies the value of the max-datagram attribute in the Session
Description Protocol (SDP) offer when the T.38 session is initiated. Range is
0 to 300 bytes.
Command was introduced.
Command default was changed to 72 bytes.
Copyright © 2012 ADTRAN, Inc.
MGCP Command Set
3254