ADTRAN AOS Version R10.1.0 Command Reference Manual page 3336

Command Reference Guide
stats-filter <name>
Use the stats-filter command to apply a previously created security monitor statistics filter globally. Use
the no version of this command to remove the filter.
Syntax Description
<name>
Default Values
No default values are necessary for this command.
Command History
Release 17.5
Functional Notes
A security monitor statistic filter is created from the Global Configuration mode using the command
security monitor stats-filter <name> on page
Usage Examples
The following example applies a filter named F1:
(config-)#ip security monitor
(config-secmon)# stats-filter F1
60000CRG0-35E
Specifies the filter to be applied.
Command was introduced.
1105.
Copyright © 2012 ADTRAN, Inc.
Security Monitor Command Set
ip
3336