ADTRAN AOS Version R10.1.0 Command Reference Manual page 3315

Command Reference Guide
match length <minimum> <maximum>
Use the match length command to configure the route map to route traffic based on the packet length. Use
the no form of this command to discontinue matching.
Syntax Description
<minimum>
<maximum>
Default Values
No default values are necessary for this command.
Command History
Release 11.1
Usage Examples
The following example instructs the route map named MYMAP to match packets with a minimum length of
1 and a maximum length of 200:
(config)#route-map MYMAP permit 100
(config-route-map)#match length 1 200
60000CRG0-35E
Specifies the minimum packet length you want to match.
Valid range is 1 to 4294967295.
Specifies the maximum packet length you want to match.
Valid range is 1 to 4294967295.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Route Map Command Set
3315