ADTRAN AOS Version R10.1.0 Command Reference Manual page 3237

Command Reference Guide
forward-disconnect delay
Use the forward-disconnect delay command to modify the forward disconnect delay time (in
milliseconds) for the Media Gateway Control Protocol (MGCP) endpoint. Use the no form of this
command to return the delay period to the default value. Variations of this command include:
forward-disconnect delay 250
forward-disconnect delay 500
forward-disconnect delay 750
forward-disconnect delay 900
forward-disconnect delay 1000
forward-disconnect delay 2000
forward-disconnect delay follow-switch
Syntax Description
250
500
750
900
1000
2000
follow-switch
Default Values
By default, the forward disconnect delay is set to follow the switch.
Command History
Release A2.04
Release A4.01
Functional Notes
Although the MGCP endpoint forward disconnect delay is set to follow the switch by default, this delay time
varies depending on the endpoint's RFC 2833 signaling specification. If the RFC 2833 signaling is
enabled, then the follow-switch parameter indicates that the Class 5 switch determines the length of the
delay time. If RFC 2833 signaling is disabled, then using follow-switch indicates that the battery is
removed for the default time of 900 ms.
Usage Examples
The following example specifies the forward disconnect delay for MGCP endpoint 1 is 1000 ms:
(config)#voice mgcp-endpoint 1
(config-mgcp-1)#forward-disconnect delay 1000
60000CRG0-35E
Specifies a 250 ms delay time.
Specifies a 500 ms delay time.
Specifies a 750 ms delay time.
Specifies a 900 ms delay time.
Specifies a 1000 ms delay time.
Specifies a 2000 ms delay time.
Specifies a delay time follows the switch.
Command was introduced.
Command syntax was updated from fwd-disconnect delay to
forward-disconnect delay.
Copyright © 2012 ADTRAN, Inc.
MGCP Command Set
3237