Table of Contents
Advertisement
Command Reference Guide
accept <pattern>
Use the accept command to specify numbers that users can dial on the trunk. This command controls the
type of outbound calls users can place on the system. Use the no form of this command to remove a
configured dial pattern and return to the default setting. Variations of this command include:
accept <pattern>
accept <pattern> cost <value>
Syntax Description
<pattern>
cost <value>
Default Values
By default, the cost value is zero.
Command History
Release 9.3
Functional Notes
The available wildcards for this command are:
0-9 = Match exact digit only.
M = Any digit 1 to 8.
X = Any single digit (0 to 9).
N = Any digit 2 to 9.
[123] = Any digit contained in the bracketed list.
Do not use dashes, commas, spaces, etc., inside the brackets. Commas are implied between
numbers in the brackets.
The special characters ( ), -, + are always ignored.
Examples:1) 555-81xx matches 555-8100 to 555-8199.
2) 555-812[012] matches 555-8120 to 555-8122.
3) 1-800$ matches any 1-800 calls.
4) Nxx-xxxx matches 7 digit local.
5) 1-Nxx-Nxx-xxxx matches long distance calls in North America.
60000CRG0-35E
Specifies the patterns users can dial on the trunk. You can enter a complete
phone number or wildcards can be used to help define accepted numbers.
Refer to Functional Notes below for more information on using wildcards.
Specifies the cost value for the trunk. This option is used if a call is accepted
by several trunks. The call will be routed to the trunk with the lowest cost
value. The valid range is 0 to 499.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice Trunk Group Command Set
3432
Advertisement
Table of Contents
