ADTRAN AOS Version R10.1.0 Command Reference Manual page 3030

Command Reference Guide
redistribute connected
Use the redistribute connected command to pass routes from one network to another, regardless of the
routing protocol implemented on the routing domain. Using the connected keyword allows the
propagation of routes connected to other interfaces using the Routing Information Protocol (RIP). Use the
no form of this command to disable the propagation of the specified route type. Variations of this
command include:
redistribute connected
redistribute connected metric <value>
redistribute connected route-map <name>
Syntax Description
metric <value>
route-map <name>
Default Values
By default, this command is disabled.
Command History
Release 3.1
Release 14.1
Functional Notes
Redistributing connected routes imports those routes into RIP without the interfaces in question actually
participating in RIP. The connected routes imported this way are not covered by a network command and
do not send/receive RIP traffic.
Usage Examples
The following example passes the connected routes found in the route table to other networks running the
RIP routing protocol:
(config)#router rip
(config-rip)#redistribute connected
60000CRG0-35E
Optional. Specifies the hop count to use for advertising redistributed routes
in RIP.
Optional. Specifies the route map filter to use for advertising redistributed
routes in RIP.
Command was introduced.
Command was expanded to include the route map filtering.
Copyright © 2012 ADTRAN, Inc.
Router (RIP) Command Set
3030