Command Reference Guide
state
Use the state command to change the state of the virtual local area network (VLAN). Variations of this
command include:
state active
state suspend
Syntax Description
active
suspend
Default Values
The default setting is active (once the VLAN has been created).
Command History
Release 5.1
Usage Examples
The following example sets the VLAN state to suspended:
(config)#vlan 2
(config-vlan 2)#state suspend
60000CRG0-35E
Changes the VLAN state to active.
Changes the VLAN state to suspended.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
VLAN Command Set
2694