ADTRAN AOS Version R10.1.0 Command Reference Manual page 3512

Command Reference Guide
rtp delay-mode
Use the rtp delay-mode command to configure the Realtime Transport Protocol (RTP) jitter buffer packet
delay mode settings. RTP is used to prevent static on voice connections by enhancing the quality of the
packet delivery. Use the no form of this command to return to the default setting. Variations of this
command include:
rtp delay-mode adaptive
rtp delay-mode fixed
Syntax Description
adaptive
fixed
Default Values
By default, this command is set to adaptive.
Command History
Release 11.1
Usage Examples
The following example configures RTP delay mode as fixed:
(config)#voice trunk t01 type isdn
(config-t01)#rtp delay-mode fixed
60000CRG0-35E
Configures RTP jitter buffer packet delay to adjust during a call based on
network conditions.
Configures the RTP jitter buffer packet delay to remain constant.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice ISDN Trunk Command Set
3512