ADTRAN AOS Version R10.1.0 Command Reference Manual page 2810

Command Reference Guide
ip default-gateway <ip address>
Use the ip default-gateway command to assign a default gateway to the wireless access point (AP). This
allows the AP to communicate with IP devices on other IP subnets. Use the no form of this command to
remove the default gateway.
Syntax Description
<ip address>
Default Values
By default, there is no configured default gateway.
Command History
Release 15.1
Usage Examples
The following example assigns the AP a default gateway for 10.10.10.1:
(config)#interface dot11ap 1
(config-dot11ap 1)#ip default-gateway 10.10.10.1
60000CRG0-35E
Specifies the default gateway IP address. IP addresses should be
expressed in dotted decimal notation (for example, 10.10.10.1).
Command was introduced for the AP interface.
Copyright © 2012 ADTRAN, Inc.
AP Interface Command Set
2810