ADTRAN AOS Version R10.1.0 Command Reference Manual page 3012

Command Reference Guide
summary-address <ip address> <subnet mask>
Use the summary-address command to control address summarization of routes that are redistributed into
open shortest path first (OSPF) from other sources (for example, Routing Information Protocol
(RIP)-to-OSPF, static-to-OSPF, etc.). Variations of this command include:
summary-address <ip address> <subnet mask>
summary-address <ip address> <subnet mask> not-advertise
Syntax Description
<ip address>
<subnet mask>
not-advertise
Default Values
By default, this command is disabled.
Command History
Release 3.1
Usage Examples
The following example suppresses advertisement of the routes that match the specified IP address and
subnet mask:
(config)#router ospf
(config-ospf)#summary-address 11.0.0.0 255.0.0.0 not-advertise
60000CRG0-35E
Specifies a valid IP address. IP addresses should be expressed in dotted
decimal notation (for example, 10.10.10.1).
Specifies the subnet mask that corresponds to a range of IP addresses
(network) or a specific host. Subnet masks can be expressed in dotted
decimal notation (for example, 255.255.255.0) or as a prefix length (for
example, /24).
Optional. Causes suppression of routes that match the specified IP address
and subnet mask.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Router (OSPF) Command Set
3012