ADTRAN AOS Version R10.1.0 Command Reference Manual page 3221

Command Reference Guide
men-pri
Use the men-pri command to specify the Metro Ethernet network (MEN) priority that the Ethernet virtual
connection (EVC) will use for traffic matching the EVC map. Use the no form of this command to return
to the default setting. Variations of this command include:
men-pri inherit
men-pri <value>
Syntax Description
inherit
<value>
Default Values
By default, matched traffic has an inherited priority.
Command History
Release A4.01
Usage Examples
The following example specifies that traffic matching EVC map Map1 is given a priority of 5 in the
associated EVC:
(config)#mef evc-map Map1
(config-evc-map-Map1)#men-pri 5
60000CRG0-35E
Specifies that the MEN priority value for the matched traffic is inherited from
the 802.1p value of the customer equipment (CE) virtual local area network
(VLAN).
Specifies a specific priority value is given to the matched traffic in the EVC.
Valid range is 0 to 7.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
MEF EVC Map Command Set
3221