Command Reference Guide
dscp <value>
Use the dscp command to specify the differentiated services code point (DSCP) value placed in the test
packets. Use the no form of this command to return to the default setting.
Syntax Description
<value>
Default Values
By default, the DSCP value is 0.
Command History
Release 13.1
Release 17.2
Usage Examples
The following example specifies DSCP value to be placed in the probe:
(config)#probe probe2 icmp-timestamp
(config-probe-probe2)#dscp 15
60000CRG0-35E
Specifies the DSCP value. The range is 0 to 63.
Command was introduced.
Command was added to the Two-Way Active Measurement Protocol
(TWAMP) and Internet Control Message Protocol (ICMP) timestamp
probes.
Copyright © 2012 ADTRAN, Inc.
Network Monitor Probe Command Set
2947