ADTRAN AOS Version R10.1.0 Command Reference Manual page 3573

Command Reference Guide
max-number-calls <value>
Use the max-number-calls command to configure the maximum number of calls allowed on this trunk.
This command is useful in controlling the call usage of the trunk. Use the no form of this command to
return to the default setting.
Syntax Description
<value>
Default Values
By default, no maximum number of calls is specified.
Command History
Release 11.1
Usage Examples
The following example sets the maximum number of calls allowed to 25:
(config)#voice trunk t01 type sip
(config-t01)#max-number-calls 25
60000CRG0-35E
Specifies the maximum number of calls allowed on this trunk. Range is 1 to
64 calls.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice SIP Trunk Command Set
3573