ADTRAN AOS Version R10.1.0 Command Reference Manual page 3608

Command Reference Guide Voice T1 Trunk Command Set
blind-dial
Use the blind-dial command to allow calls to be placed without the presence of dial tone. Use the no form
of this command to disable blind dialing.
Syntax Description
No subcommands.
Default Values
By default, blind-dial is disabled.
Command History
Release 9.1 Command was introduced.
Usage Examples
The following example enables blind dialing:
(config)#voice trunk t01 type t1-rbs supervision loop-start role user
(config-t01)#blind-dial
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 3608