ADTRAN AOS Version R10.1.0 Command Reference Manual page 2811

Command Reference Guide
location <name>
Use the location command to specify the location of the wireless access point (AP). Use the no form of
this command to remove the specified location.
Syntax Description
<name>
Default Values
No default values are necessary for this command.
Command History
Release 15.1
Usage Examples
The following example assigns the name floor5 as the location of AP 1:
(config)#interface dot11ap 1
(config-dot11ap 1)#location floor5
60000CRG0-35E
Specifies the name of the location of the AP. The location name may be up
to 32 characters.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
AP Interface Command Set
2811