ADTRAN AOS Version R10.1.0 Command Reference Manual page 3434

Command Reference Guide
deny
Use the deny command to add a proxy, automatic number identification (ANI) list, or trunk list to a voice
trunk group's deny policy. Use the no form of this command to remove the proxy, ANI list, or trunk list
from the deny policy. Variations of this command include:
deny list <name>
deny proxy
Syntax Description
list <name>
proxy
Default Values
By default, no list or proxy is part of the trunk group's deny policy.
Command History
Release A2
Functional Notes
The trunk and ANI lists are created as part of the Source and ANI Based Routing (SABR) feature on AOS
voice products. For more information about SABR, refer to the SABR in AOS configuration guide available
online at https://supportforums.adtran.com
or trunk lists, refer to voice ani-list <name> on page 1377
Although there is no limit on the number of lists applied to voice trunk groups, it is
important to remember that the more lists that are applied to a trunk group, the more the
runtime performance of call routing will be affected.
Usage Examples
The following example applies the TEST2 list to the deny policy of trunk group TestGroup:
(config)#voice grouped-trunk TestGroup
(config-TestGroup)#deny list TEST2
60000CRG0-35E
Specifies that either a trunk list or ANI list is added to the trunk group's deny
policy.
Specifies that the proxy is added to the trunk group's deny policy.
Command was introduced.
(article number 2510). For more information about creating ANI
Copyright © 2012 ADTRAN, Inc.
Voice Trunk Group Command Set
or voice trunk-list <name> on page 1451.
3434