ADTRAN AOS Version R10.1.0 Command Reference Manual page 3227

Command Reference Guide
eir <number>
Use the eir command to configure the excess information rate (EIR) for the Metro Ethernet Forum (MEF)
policer policy. The EIR threshold specifies the maximum rate in kilobits per second (kbps), over and above
the committed information rate (CIR) threshold, before the policer policy drops traffic. The EIR value
must be greater than or equal to the CIR value. Use the no form of this command to return to the default
setting.
Syntax Description
<number>
Default Values
By default, the EIR is 600000 kbps.
Command History
Release A4.01
Usage Examples
The following example specifies that MEF policer Policy1 uses an EIR threshold of 1000:
(config)#mef policer Policy1
(config-policer-Policy1)#eir 1000
60000CRG0-35E
Specifies the EIR threshold in kbps. Valid range is 250 to 600000.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
MEF Policer Policy Command Set
3227