ADTRAN AOS Version R10.1.0 Command Reference Manual page 3541

Command Reference Guide Voice SIP Trunk Command Set
check-supported replaces
Use the check-supported replaces command to check all support extensions on outbound messages and
only send replaces when supported by the far-end device. Otherwise, replaces are automatically sent
regardless of the far-end capabilities. Use the no form of this command to disable this feature.
Syntax Description
No subcommands.
Default Values
By default, this command is disabled.
Command History
Release 15.1 Command was introduced.
Usage Examples
The following example sets all DS0s on trunk T01 to busy and terminates calls that are active at the time
the command is issued:
(config)#voice trunk t01 type sip
(config-t01)#check-supported replaces
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 3541