ADTRAN AOS Version R10.1.0 Command Reference Manual page 2986

Command Reference Guide
180 seconds after bootup, the schedule DELAY-AFTER-BOOT becomes active. Subsequently, track
DELAY fails. The default route to null interface 0 is removed from the routing table and will not be placed in
the route table again as long as the AOS unit is up. The two default routes that remain are the current
default route to the primary WAN Ethernet interface (administrative distance is 1) and the backup default
route to the demand interface (administrative distance is 200).
The following example uses the test if interface command to specify testing the IP routing capability of an
Ethernet interface:
(config)#track track1
(config-track-track1)#test if interface ethernet 0/1 ip-routing
To view the results of the test, use the do show track track1 command:
(config-track-track1)#do show track track1
Current State: FAIL
Testing:
interface eth 0/1 ip-routing (FAIL)
Dampening Interval: 1 seconds
Time in current state: 0 days, 0 hours, 0 minutes, 4 seconds
Track State Changes: 1
Tracking:
60000CRG0-35E
(Admin: UP)
Copyright © 2012 ADTRAN, Inc.
Network Monitor Track Command Set
2986