ADTRAN AOS Version R10.1.0 Command Reference Manual page 3017

Command Reference Guide
join-prune-msg-interval <value>
Use the join-prune-msg-interval command to set a timing rate for protocol-independent multicast (PIM)
sparse join/prune messages. Use the no form of this command to return to the default setting.
Syntax Description
<value>
Default Values
By default, the message interval is set to 60 seconds.
Command History
Release 11.1
Usage Examples
The following example sets the interval for 50 seconds:
(config)#router pim-sparse
(config-pim-sparse)#join-prune-msg-interval 50
60000CRG0-35E
Specifies the PIM sparse join/prune message interval. Valid range:
10 to 65534 seconds.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Router (PIM Sparse) Command Set
3017