ADTRAN AOS Version R10.1.0 Command Reference Manual page 3065

Command Reference Guide
timezone-offset <value>
Use the timezone-offset command to specify the time zone adjustment (in hours) published to the
Dynamic Host Control Protocol version 4 (DHCPv4) client. Use the no form of this command to remove a
time zone offset.
Syntax Description
<value>
Default Values
No default values are necessary for this command.
Command History
Release 9.1
Usage Examples
The following example sets the time zone adjustment for the client to -3 hours. For example, if the server
time is configured for Eastern time and the client is configured for Pacific time, you can set the client time
zone adjustment to -3 hours:
(config)#ip dhcp pool MyPool
(config-dhcp)#timezone-offset -3
60000CRG0-35E
Specifies the time zone adjustment (in hours) published to the client. Use an
integer from -12 to 12 hours.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
DHCPv4 Pool Command Set
3065