ADTRAN AOS Version R10.1.0 Command Reference Manual page 3339

Command Reference Guide
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
cross-connect on page 67
To create a SIP HMR policy, and enter the SIP HMR Policy Configuration mode, enter the hmr policy
<name> parameter from the Global Configuration mode as follows:
(config)#hmr policy POLICY1
(config-policy-POLICY1)#
The commands available in the HMR Policy Configuration mode are listed in alphabetical order below:
rule-set on page 3354
To create a SIP HMR rule set, and enter the HMR Rule Set Configuration mode, enter the hmr rule-set
<name> command from the Global Configuration mode as follows:
(config)#hmr rule-set SET1
(config-rule-set-SET1)#
The commands available in the HMR Rule Set Configuration mode are listed in alphabetical order below:
message-rule on page 3344
To configure the actions of the HMR message rules, enter the HMR Message Rule Configuration mode by
entering the message-rule command from the HMR Rule Set Configuration mode as follows:
(config)#hmr rule-set SET1
(config-rule-set-SET1)#message-rule RULE1 message-type any 5
(config-msg-rule-RULE1)#
The commands available in the HMR Message Rule Configuration mode are listed in alphabetical order
below:
add header position on page 3340
match header on page 3342
match private-variable on page 3346
match public-variable on page 3347
modify body on page 3348
modify header position on page 3349
remove header position on page 3352
set private-variable on page 3355
set public-variable on page 3358
60000CRG0-35E Copyright © 2012 ADTRAN, Inc.
SIP HMR Command Set
3339