ADTRAN AOS Version R10.1.0 Command Reference Manual page 3416

Command Reference Guide
executive-extension <number>
Use the executive-extension command to tie an executive's extension to an assistant's extension.
This command only applies to type executive ring group(s). Refer to
more information.
Syntax Description
<number>
Default Values
No default values are necessary for this command.
Command History
Release 10.1
Functional Notes
This command is used in conjunction with the assistant-extension command (refer to
<number> on page 3409). When the executive's extension is dialed, both the assistant's and the
executive's phones will ring. If neither phone is answered (or both are busy or set to do-not-disturb (DND)),
the call is forwarded through the executive's call coverage list.
Usage Examples
The following example creates the executive ring group 1234 and causes both the executive (extension
4440) and the assistant (extension 4444) phones to ring when the executive extension is dialed:
(config)#voice ring-group 1234
(config-1234)#type executive
(config-1234)#executive-extension 4440
(config-1234)#assistant-extension 4444
60000CRG0-35E
Specifies the number of the executive's extension.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice Ring Group Command Set
type on page 3425
assistant-extension
for
3416