ADTRAN AOS Version R10.1.0 Command Reference Manual page 3085

Command Reference Guide
vendor-specific <number>
Use the vendor-specific command to specify a specific vendor option for the Dynamic Host Control
Protocol version 6 (DHCPv6) pool and to enter the vendor-specific configuration mode. Use the no form
of this command to remove the vendor-specific options or suboptions from the pool. Variations of this
command include:
vendor-specific <number>
Additional subcommands are available once you have entered the vendor-specific DHCPv6 Pool
Configuration mode:
suboption <number> address <ipv6 address>
suboption <number> ascii <string>
suboption <number> hex <hexbytes>
Syntax Description
vendor-specific <number>
suboption <number>
address <ipv6 address>
ascii <string>
hex <hexbytes>
Default Values
By default, no vendor-specific options or suboptions are configured.
Command History
Release 18.3
Usage Examples
The following example configures a vendor-specific DHCPv6 pool entry, and configures a suboption for
that entry:
(config)#ipv6 dhcp pool MyPool
(config-dhcpv6)#vendor-specific 6
(config-dhcpv6-vs)#suboption 7 address 2001:DB8:1::1
60000CRG0-35E
Specifies the enterprise identifier of the vendor information you are entering.
Valid range is 1 to 4294967295.
Specifies the vendor-specific option number for the suboption. Valid range
is 0 to 65535.
Specifies that the suboption value is an IPv6 address. IPv6 addresses
should be expressed in colon hexadecimal format (X:X:X:X::X). For
example, 2001:DB8:1::1.
Specifies that the suboption is expressed as a simple text ASCII string of up
to 256 characters.
Specifies that the suboption is expressed as a hexadecimal number of up to
512 digits.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
DHCPv6 Pool Command Set
3085