Command Reference Guide
match metric <value>
Use the match metric command to configure the route map to route traffic based on a specified metric
value. Use the no form of this command to discontinue matching.
Syntax Description
<value>
Default Values
No default values are necessary for this command.
Command History
Release 10.1
Usage Examples
The following example instructs the route map named MYMAP to match the metric value 100:
(config)#route-map MYMAP permit 100
(config-route-map)#match metric 100
60000CRG0-35E
Specifies the metric value you want to match. Valid range is 1 to
4294967295.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Route Map Command Set
3316