Voice Paging Group Command Set - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide
V P
OICE AGING
The voice paging group configures handset paging parameters. Handset paging is a feature that provides
paging to select groups of users through their IP phone handset. Handset paging works through a one-way
audio transmission received as a call on individual IP phones, rather than on an overhead speaker using a
private branch exchange (PBX) as overhead paging does. A handset page is initiated by a member of the
paging group and sent to other members of the group. Voice paging groups are defined and organized
using the commands in this section. For more information on using handset paging, refer to the Handset
Paging for the NetVanta 7000 Series quick configuration guide (article number 3102) available online at
https://supportforums.adtran.com.
To activate the Voice Paging Group Configuration mode, enter the voice paging-group <extension>
command from the Global Configuration mode prompt. For example:
>enable
#configure terminal
(config)#voice paging-group 8956
Configuring new paging group "8956".
(config-8956)#
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
description <text> on page 70
do on page 71
end on page 72
exit on page 73
shutdown on page 82
All other commands for this command set are described in this section in alphabetical order.
codec on page 3403
include-paging-port on page 3404
member <extension> on page 3405
page-timeout <seconds> on page 3406
60000CRG0-35E
G C
ROUP OMMAND
Copyright © 2012 ADTRAN, Inc.

Voice Paging Group Command Set

S
ET
3402