ADTRAN AOS Version R10.1.0 Command Reference Manual page 3014

Command Reference Guide
timers spf <delay> <hold>
Use the timers spf command to configure the shortest path first (SPF) calculation and hold intervals. Use
the no form of this command to return to the default setting.
Syntax Description
<delay>
<hold>
Default Values
By default, the SPF delay is 5 seconds and the hold interval is set to 10 seconds.
Command History
Release 3.1
Usage Examples
The following example defines a delay of 10 seconds and a hold time of 30 seconds:
(config)#router ospf
(config-ospf)#timers spf 10 30
60000CRG0-35E
Specifies the time in seconds between open shortest path first's (OSPF's)
receipt of topology changes and the beginning of SPF calculations.
Specifies the time in seconds between consecutive SPF calculations.
Range is 10 to 1800 seconds.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Router (OSPF) Command Set
3014