Command Reference Guide
set metric-type
Use the set metric-type command to set the open shortest path first (OSPF) metric type for the route map.
Use the no form of this command to return to the default value. Variations of this command include:
set metric-type type-1
set metric-type type-2
Syntax Description
type-1
type-2
Default Values
By default, the metric type is set to type 1.
Command History
Release 14.1
Usage Examples
The following example sets the metric-type value for MYMAP to type 2:
(config)#route-map MYMAP permit 100
(config-route-map)#set metric-type type-2
60000CRG0-35E
Specifies intra-area metric.
Specifies inter-area metric.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Route Map Command Set
3332