ADTRAN AOS Version R10.1.0 Command Reference Manual page 2981

Command Reference Guide Network Monitor Track Command Set
shutdown
Use the shutdown command to disable a track. While a track is shut down, it is forced to fail. Use the no
form of this command to enable a track.
Syntax Description
No subcommands.
Default Values
By default, tracks are active when created.
Command History
Release 13.1 Command was introduced.
Functional Notes
A track must be created first using the track command in the Global Configuration mode. Refer to the
command track <name> on page 1372 for more information. Issuing the shutdown command at the track
configuration prompt will force the track to fail.
Usage Examples
The following example enables track1:
(config)#track track1
(config-track-track1)#no shutdown
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 2981