ADTRAN AOS Version R10.1.0 Command Reference Manual page 3538

Command Reference Guide
busy all
Use the busy all command to set all level zero digital signals (DS0s) to busy so that no calls are allowed
inbound or outbound. If any calls are active at the time this command is issued, the calls will stay active
until either party terminates the call. Once terminated, the DS0s are busied out. Use the no form of this
command to disable this feature. Variations of this command include:
busy all
busy all now
Syntax Description
now
Default Values
By default, this command is disabled.
Command History
Release 9.3
Release 15.1
Usage Examples
The following example sets all DS0s on trunk T01 to busy and terminates calls that are active at the time
the command is issued:
(config)#voice trunk t01 type sip
(config-t01)#busy all now
60000CRG0-35E
Optional. Immediately terminates calls that are active at the time the
command is issued.
Command was introduced.
Command was added to the Voice Trunk Session Initiation Protocol (SIP)
command set.
Copyright © 2012 ADTRAN, Inc.
Voice SIP Trunk Command Set
3538