Command Reference Guide
VLAN Interface Command Set
The following example specifies an IP address of 10.0.0.1 for a VRRP router within virtual router group 1:
(config)#interface vlan 1
(config-interface-vlan 1)#vrrp 1 ip 10.0.0.1
The following example specifies that the VRRP router within virtual router group 1 preempts the current
master router after a 30 second delay:
(config)#interface vlan 1
(config-interface-vlan 1)#vrrp 1 preempt delay minimum 30
The following example specifies the configured priority for the VRRP router within virtual router group 1 is
254:
(config)#interface vlan 1
(config-interface-vlan 1)#vrrp 1 priority 254
The following example disables the VRRP router within virtual router group 1:
(config)#interface vlan 1
(config-interface-vlan 1)#vrrp 1 shutdown
The following example configures a VRRP router on group 1 to delay 45 seconds before becoming active:
(config)#interface vlan 1
(config-interface-vlan 1)#vrrp 1 startup-delay 45
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
2795
Need help?
Do you have a question about the AOS Version R10.1.0 and is the answer not in the manual?
Questions and answers