Command Reference Guide
hostname
Use the hostname command to specify the manual binding of a host name or fully qualified domain name
(FQDN) to the specified Dynamic Host Control Protocol version 6 (DHCPv6) client. Use the no form of
this command to remove the host name or FQDN from the client. Variations of this command include:
hostname <partial fqdn>
hostname fqdn <fqdn>
Syntax Description
<partial fqdn>
fqdn <fqdn>
Default Values
By default, no host names are specified.
Command History
Release R10.1.0
Usage Examples
The following example specifies an FQDN for the DHCPv6 client F2A4C9:
(config-dhcpv6)#host client-identifier F2A4C9
(config-dhcpv6-host)#hostname fqdn host.company.com
60000CRG0-35E
Specifies the DHCPv6 client's host portion of its FQDN without a specified
zone.
Specifies the DHCPv6 client's entire FQDN.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
DHCPv6 Server Pool Host Command Set
3090