Command Reference Guide
BGP Address Family Command Set
Redistributing RIP routes imports those routes into BGP. The RIP routes imported this way are not covered
by a network command.
If redistribute rip is enabled and no metric value is specified, the value defaults to 0.
Usage Examples
The following example imports RIP routes into the IPv4 BGP AF on the default VRF instance:
(config)#router bgp 100
(config-bgp)#address-family ipv4
(config-bgp-ipv4)#redistribute rip
The following example imports RIP routes into the IPv4 BGP AF on the nondefault VRF instance named
RED1:
(config)#vrf RED1 route-distinguisher ip 192.17.250.24:33
(config)#router bgp 100
(config-bgp)#vrf RED1
(config-bgp-vrf)#address-family ipv4
(config-bgp-vrf-ipv4)#redistribute rip
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
2913