ADTRAN AOS Version R10.1.0 Command Reference Manual page 3232

Command Reference Guide
block-caller-id
Use the block-caller-id command to block caller ID information included in Media Gateway Control
Protocol (MGCP) signaling on the endpoint. Use the no form of this command to allow caller ID
information to appear.
Syntax Description
No subcommands.
Default Values
By default, caller ID information is allowed.
Command History
Release 10.1
Release A2
Usage Examples
The following example enables caller ID information blocking on MGCP endpoint 1:
(config)#voice mgcp-endpoint 1
(config-mgcp-1)#block-caller-id
60000CRG0-35E
Command was introduced.
Command was added to the MGCP endpoint configuration.
Copyright © 2012 ADTRAN, Inc.
MGCP Command Set
3232