ADTRAN AOS Version R10.1.0 Command Reference Manual page 2956

Command Reference Guide Network Monitor Probe Command Set
shutdown
Use the shutdown command to disable a probe and cause it to cease generating traffic. While a probe is
shut down, it will return a fail value to a track. Use the no form of this command to enable a probe to
generate traffic.
Syntax Description
No subcommands.
Default Values
By default, probes are shut down when created.
Command History
Release 13.1 Command was introduced.
Functional Notes
A probe must be created first using the probe command. Refer to probe on page 1291 for more
information. Issuing the shutdown command at the probe configuration prompt will disable a probe,
causing it to cease generating traffic.
Usage Examples
The following example disables probe1:
(config)#probe probe1 http-request
(config-probe-probe1)#shutdown
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 2956