ADTRAN AOS Version R10.1.0 Command Reference Manual page 2815

Command Reference Guide
antenna
Use the antenna command to select the desired antenna mode. Use the no form of this command to return
to the default value. Variations of this command include the following:
antenna 1
antenna 2
antenna diversity
Syntax Description
1
2
diversity
Default Values
By default, the antenna is set to diversity.
Command History
Release 15.1
Functional Notes
Diversity antennas are two separate antennas that are attached to a single wireless radio. These antennas
are designed to reduce the effects of multi-path radio distortion. Each antenna samples the radio signal
around the access point (AP). The antenna receiving the best signal is chosen to transmit and receive
information. Only one diversity antenna is in use at any given time.
Usage Examples
The following example sets the antenna mode to transmit or receive on antenna 1 on an 802.11bg wireless
radio:
(config)#interface dot11ap 1/1 radio-type 802.11bg
(config-dot11ap 1/1-bg)#antenna 1
60000CRG0-35E
Sets the antenna mode to transmit or receive on antenna 1.
Sets the antenna mode to transmit or receive on antenna 2.
Sets the mode to transmit or receive on antenna with best signal.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Radio Interface Command Set
2815