ADTRAN AOS Version R10.1.0 Command Reference Manual page 2949

Command Reference Guide
expect status <minimum> <maximum>
Use the expect status command to configure the probe to expect a specific status code in response to an
Hypertext Transfer Protocol (HTTP) request message. If a different status code is returned, the probe fails.
Use the no form of this command to return to the default setting. Variations of this command include:
expect status <minimum>
expect status <minimum> <maximum>
Syntax Description
<minimum>
<maximum>
Default Values
By default, there is no setting for this command.
Command History
Release 13.1
Functional Notes
This command can only be executed while in the probe <name> http-request command set.
Specifying only a minimum value indicates only one value can match the status code. Entering a maximum
value indicates a range of possible matches.
Usage Examples
The following example configures probe1 to expect a status code of 200 (the status of a successful HTTP
request):
(config)#probe probe1 http-request
(config-probe-probe1)#expect status 200
60000CRG0-35E
Specifies a minimum number value for the status code. Valid range is
0 to 999.
Optional. Specifies a maximum number to create a range of status codes.
Valid range is 0 to 999.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Network Monitor Probe Command Set
2949