ADTRAN AOS Version R10.1.0 Command Reference Manual page 3447

Command Reference Guide Voice Analog Trunk Command Set
anlp
Use the anlp command to enable advance non-linear processing. Use the no form of this command to
disable blind dialing.
Syntax Description
No subcommands.
Default Values
By default, blind-dial is disabled.
Command History
Release 9.1 Command was introduced.
Usage Examples
The following example enables blind dialing:
(config)#voice trunk t01 type analog supervision loop-start
(config-t01)#blind-dial
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 3447