ADTRAN AOS Version R10.1.0 Command Reference Manual page 3313

Command Reference Guide
match ipv6 address <ipv6 acl name>
Use the match ipv6 address command to configure the route map to route traffic based on the Internet
Protocol version 6 (IPv6) access control list (ACL) name defined with the ipv6 access-list command.
Refer to ipv6 access-list standard <ipv6 acl name> on page 1183
of this command to discontinue matching.
Syntax Description
<ipv6 acl name>
Default Values
No default values are necessary for this command.
Command History
Release R10.1.0
Usage Examples
The following example instructs the route map named MYMAP to match the IPv6 address ACL named
MYLIST:
(config)#route-map MYMAP permit 100
(config-route-map)#match ipv6 address MYLIST
60000CRG0-35E
Specifies the name of the IPv6 ACL to match.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Route Map Command Set
for more information. Use the no form
3313