ADTRAN AOS Version R10.1.0 Command Reference Manual page 3064

Command Reference Guide
tftp-server <name>
Use the tftp-server command to specify the Internet Protocol version 4 (IPv4) address or IPv4 domain
naming system (DNS) name of the Trivial File Transfer Protocol (TFTP) server published to the client.
Use the no form of this command to remove a defined TFTP server.
Syntax Description
<name>
Default Values
By default, no TFTP server is defined.
Command History
Release 9.1
Usage Examples
The following example specifies the IPv4 address of the TFTP server:
(config)#ip dhcp pool MyPool
(config-dhcp)#tftp-server 192.168.1.1
The following example specifies the DNS name of the TFTP server:
(config)#ip dhcp pool MyPool
(config-dhcp)#tftp-server MyServer.adtran.com
60000CRG0-35E
Specifies the IPv4 DNS name or dotted decimal notation IPv4 address of
the server.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
DHCPv4 Pool Command Set
3064