Table of Contents
Advertisement
Command Reference Guide
caller-id-override
Use the caller-id-override command to replace the calling party information for this trunk with a specific
number. This command is used to conceal a user's name and number or to display a different name and
number for internal or external caller ID. Use the no form of this command to cancel the setting. Variations
of this command include:
caller-id-override emergency-outbound <number>
caller-id-override emergency-outbound match-substitute
caller-id-override number-inbound <number>
caller-id-override number-inbound <number> if-no-cpn
caller-id-override number-inbound <number> <trunk id>
Syntax Description
<number>
<trunk id>
emergency-outbound
match-substitute
number-inbound
if-no-cpn
Default Values
No default values are necessary for this command.
Command History
Release 10.1
Release 15.1
Release 16.1
Release A4.01
Usage Examples
The following example sets the caller ID override number on the trunk where the command is issued:
(config)#voice trunk t01 type analog supervision loop-start
(config-t01)#caller-id-override number-inbound 555-8000
60000CRG0-35E
Specifies the number to display on caller ID.
Optional. Specifies the trunk ID (Txx) for outbound calls.
Specifies the calling party number on outbound emergency calls.
Specifies the configured automatic number identification (ANI) match
substitution for outbound emergency calls.
Specifies the calling party number on inbound calls.
Optional. Specifies caller ID override only if calling party number is not
available in the automatic number identification (ANI).
Command was introduced.
Command was expanded.
Command was expanded to include the if-no-cpn subcommand.
Command was expanded to include the match-substitute subcommand.
Copyright © 2012 ADTRAN, Inc.
Voice Analog Trunk Command Set
3454
Advertisement
Table of Contents
