ADTRAN AOS Version R10.1.0 Command Reference Manual page 3261

Command Reference Guide
export
Use the export command to specify the export mode used to export packet capture (Pcap) files. You can
specify the location and type of export used for exporting the Pcap files. Use the no form of this command
to remove an export entry in the packet-capture configuration. Variations of this command include:
export cflash
export cflash <path>
export flash
export flash <path>
export usbdrive0
export usbdrive0 <path>
export http <ipv4 address | hostname>
export http <ipv4 address | hostname> port <port>
export http <ipv4 address | hostname> path <path>
export http <ipv4 address | hostname> username <username> password <password>
export http <ipv4 address | hostname> username <username> password encrypted <password>
export http <ipv4 address | hostname> port <port> path <path> username <username> password
<password>
export http <ipv4 address | hostname> port <port> path <path> username <username> password
encrypted <password>
export https <ipv4 address | hostname>
export https <ipv4 address | hostname> port <port>
export https <ipv4 address | hostname> path <path>
export https <ipv4 address | hostname> username <username> password <password>
export https <ipv4 address | hostname> username <username> password encrypted <password>
export https <ipv4 address | hostname> port <port> path <path> username <username> password
<password>
export https <ipv4 address | hostname> port <port> path <path> username <username> password
encrypted <password>
export tftp <ipv4 address>
export tftp <ipv4 address> port <port>
Syntax Description
cflash
flash
usbdrive0
60000CRG0-35E
Specifies the Pcap files are exported to CompactFlash. If the optional
<path> parameter is not specified, files are exported to the /PacketCapture
directory by default.
Specifies the Pcap files are exported to flash memory. If the optional <path>
parameter is not specified, files are exported to the /PacketCapture
directory by default.
Specifies the Pcap files are exported to the USB file system. If the optional
<path> parameter is not specified, files are exported to the /PacketCapture
directory by default.
Copyright © 2012 ADTRAN, Inc.
Packet Capture Command Set
3261