ADTRAN AOS Version R10.1.0 Command Reference Manual page 3211

Command Reference Guide
server <dns-name/ip address>
Use the server command to specify the Simple Mail Transfer Protocol (SMTP) server for sending mail
agent notifications. Use the no form of this command to return the server setup to the default value.
Syntax Description
<dns-name>
<ip address>
Default Values
By default, the SMTP server is set to the value defined by the command
address | hostname> on page
Command History
Release 17.2
Usage Examples
The following example specifies that mail agent myagent use the SMTP server at IP address 172.5.67.99
to send email messages:
(config)#mail-client myagent
(config-mail-client-myagent)#server 172.5.67.99
60000CRG0-35E
Specifies the domain naming system (DNS) name of the SMTP server.
Specifies the IP address of the SMTP server. IP addresses are expressed in
dotted decimal notation (for example, 10.10.10.1).
1244.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Mail Agent Command Set
logging email receiver-ip <ip
3211